In case of a Linux PUTTY copy and paste is done by marking the text in e.g. Edit the startup script to disable program hbwd from automatic running at boot time. bash-3.2# /sbin/halt # then remove USB-stickģ. bash-3.2# sync # write data cache to USB-stick bash-3.2# cd /tmp/.cemnt/mnt_sda1 # change directory to USB-stick bash-3.2# cat /proc/mtd # show Flash-ROM partitions tmp/.cemnt/sda2 on /tmp/.cemnt/mnt_sda2 type ext3 (rw,nosuid,nodev,noexec,noatime,data=ordered) tmp/.cemnt/sda1 on /tmp/.cemnt/mnt_sda1 type ext2 (rw,nosuid,nodev,noexec,noatime) bash-3.2# mount # show all mounted folders/devices Or use PUTTY (Linux/Windows), user: root, password: stxadmin.
Login at the DockStar ~ $ ssh # password is stxadmin. A try to mount an USB-stick after disabling hbwd was not successful.
Put an USB-stick in one USB port, it will be auto mounted, as long as the daemon hbwd is running. At it looks like, it is not easy to do a restore operation. Do a backup of the Flash-ROM to an USB-stick (found here, Alexander Holler), just in case. This is to verify the calculated IP address of the DockStar connected to the computer.Ģ. # This is a clever method to predict the IP address, even if there a several DockStar's in use. " command the hexadecimal values are converted to decimal. # 0xce 0圆e are the last 4 hexadecimal digits of the MAC address, found on the bottom of the DockStar on a post. $ sudo ifconfig eth0 169.254.1.0 # set own IP adress new to the DockStar segment
In case of a cross patch cable to an other Linux computer type on the host in a terminal: readout from the router the IP number for DockStar connect DockStar to the router and get an IP number via DHCP disconnect the router from the Internet (DSL) In case of the use of an Internet router: Connect the DockStar to a host computer via network without Internet connection. Take care that the utility nmap is installed, with the terminal: # Check for installed nmapġ. I will try to make it as easy as possible, concerning the Linux knowledge. Please use the following steps to disable the automatic update.
If you connect first to the Internet DockStar will phone home and perform an upgrade with a new firmware that has telnet/SSH disabled and an unknown password. WARNING: When you receive your Seagate DockStar, please do not connect it first to the Internet unless you have disabled the hbmgr.sh by editing the file /etc/init.d/rcS. I collected already existing information and tried to extend it in such a way, that it is more user friendly.
The application TempMess will run with Debian wheezy (Ver. temperature measurement) and a webcam (Logitech E3500), see CategoryHeizung. 6) with a DockStar kernel (LED in use) and application programs for using a 1-wire interface (e.g. I have now installed on a 1 GB USB-stick DockStarDebian (squeezy, Ver. This box was () on sale in Germany for about $33, see picture.